Shop
Showing 301–312 of 721 results
-
Line Impedance Stabilization NetworkArtificial Mains Network LISN 3830
Model：LISN 3830
Artificial mains network LISN 3830 is designed according to RTCA DO-160G for relative EMC susceptibility / immunity tests.
Model：LISN 3830
Artificial mains network LISN 3830 is designed according to RT
...(0 reviews) -
Line Impedance Stabilization NetworkUnbalanced High Frequency Line
Model：VHF-LISN NBM3-16
CISPR16-1-4 Ed.3.2 defines clearly to the design and performance of high frequency line impedance stabilization networks.
Model：VHF-LISN NBM3-16
CISPR16-1-4 Ed.3.2 defines clearly to the design and pe
...(0 reviews) -
Line Impedance Stabilization NetworkReference Impedance LISN F 16A
Model：LISN F 16A
The LISN F 16A is designed according to GB/T 17625.2 and applicable to voltage fluctuation and flicker test impressed on three-phase power. Similar terminals are designed respectively on front and rear panel to make test connection easy.
Model：LISN F 16A
The LISN F 16A is designed according to GB/T 17625.2 and appl
...(0 reviews) -
Line Impedance Stabilization NetworkLine Impedance Stabilization Network LISN
Model：LISN ML500HVS
The line impedance stabilization network LISN ML500HVS is designed as per GJB151B and MIL-STD-461 and used for isolating power interference and provide specified power impedance for EUT.
Model：LISN ML500HVS
The line impedance stabilization network LISN ML500HVS is
...(0 reviews) -
Line Impedance Stabilization NetworkLine Impedance Stabilization Network LISN
Model：LISN AR 50
The line impedance stabilization network LISN AR 50 is designed as per section 20 and 22 in RTCA / DO 160 and used to standardize the impedance of the power source that provides input power for the EUT(s).
Model：LISN AR 50
The line impedance stabilization network LISN AR 50 is design
...(0 reviews) -
Spectrum AnalyzersSpike Surge Voltage Simulator VSS 1275
Model：VSS 1275
The spike surge voltage simulator VSS 1275 is designed for spike and surge conducted susceptibility tests to 28 V DC input power to utilization equipment in military vehicles as per MIL-STD-1275E.
Model：VSS 1275
The spike surge voltage simulator VSS 1275 is designed for spik
...(0 reviews) -
Micsig tBookCM 0220M Wide-band Current Monitor
Model：CM 0220M
The CM 0220M is used for measuring alternating current and time domain pulse current in the frequency range from 10 Hz to 20 MHz.
Model：CM 0220M
The CM 0220M is used for measuring alternating current and time
...(0 reviews) -
Micsig tBookCurrent Injection Clamp BCIP-200
Model：BCIP-200
The BCIP-200 current injection clamp is a wideband current coupling device, which can transfer the time-harmonic signal current or pulse signal current to the test device (EUT).
Model：BCIP-200
The BCIP-200 current injection clamp is a wideband current coup
...(0 reviews) -
Micsig tBookDirect-Current Surge Voltage Pulse
Model：VDG 298
The direct-current surge voltage pulse generator VDG 298 is designed according to GJB 298 and the characteristics of 28 V DC power supply system of military vehicles.
Model：VDG 298
The direct-current surge voltage pulse generator VDG 298 is desi
...(0 reviews) -
MIL-STD-461 Series/ GJB 151、181 SeriesCurrent Injection Clamp Calibration Fixture
Model：BCICF-400
Current injection clamp calibration fixture BCICF-400 is used for the calibration of current injection clamps. current injection clamps are widely used to transmit time-harmonic signal current or pulse signal current to EUT through magnetic coupling.
Model：BCICF-400
Current injection clamp calibration fixture BCICF-400 is used
...(0 reviews) -
MIL-STD-461 Series/ GJB 151、181 SeriesWideband Current Monitoring Clamp
Model：TWCM-500
Wideband current monitoring clamp TWCM-500 is used to measure 1 kHz ? 500 MHz alternating current and time-domain impulse current.
Model：TWCM-500
Wideband current monitoring clamp TWCM-500 is used to measure 1
...(0 reviews) -
MIL-STD-461 Series/ GJB 151、181 SeriesWideband Current Monitoring Clamp
Model：TWCM-200
Wideband current monitoring clamp TWCM-200 is used to measure 1 kHz ? 200 MHz alternating current and time-domain impulse current.
Model：TWCM-200
Wideband current monitoring clamp TWCM-200 is used to
...(0 reviews)
