TekBox TBLM2 LISN MATE

Code: TBLM2

The TBLM2 LISN Mate can be used to measure common-mode and differential mode noise measured separately. The LISN Mate is connected to the output of a LISN which is inserted into the positive supply line, and to a second LISN connected to the negative supply line (e.g. with a (e.g. with two TBL5016-1 or two TBOH01).

In Stock 2-3 Weeks
Enquire Now

Description

The TBLM2 is is a Common Mode / Differential Mode – separator companion device for LISN. The LISN Mate is connected to the output of a LISN inserted into the positive supply line and to a second LISN inserted into the negative supply line.

The conducted noise signal at the output of a LISN is the sum of common mode and differential mode noise. The LISN mate separates it into the common mode and differential mode components, with each signal component available at a separate BNC port. The TBLM2 can be used in the frequency range from 9 kHz to 110 MHz.

Specifications:

  • Nominal frequency range: 150 kHz – 100 MHz
  • Usable frequency range: 9kHz – 110 MHz
  • Port impedance:
  • │ZLISN1│, │ZLISN2│,│ZCM│: 150 kHz – 1 MHz: 30…55 Ohm, 1 MHz -30 MHz: 50….60 Ohm, 30 MHz – 100 MHz: 50….70 Ohm
  • │ZDM│: 150 kHz – 1 MHz: 30…50 Ohm, 1 MHz -30 MHz: 40….50 Ohm, 30 MHz – 100 MHz: 40….70 Ohm
  • │ZLISN1│: independent of the termination at the LISN2 port
  • │ZLISN2│: independent of the termination at the LISN1 port
  • │ZCM LISN1-LISN2│: 25 Ohm nominal
  • │ZDM LISN1-LISN2│: 100 Ohm nominal
  • Maximum RF level at any BNC port: 27dBm
  • Maximum DC current at any BNC port: 30 mA
    You will find the specifications of the TBLM2 LISN here.

Downloads

Datasheet


Adobe PDF

TBLM2-Datasheet

Language: English
Version: V1.1
File Size: 1,008.23 KiB
Release Date: 02.01.2025

Guide


Adobe PDF

EMC pre compliance testing guide German

Language: German
Version: V1.7
File Size: 402.40 KiB
Release Date: 12.10.2022
This document focusses on measurement equipment and methods, limits and the relevant standards of conducted noise measurement on the power supply lines of products. The document tries to reduce the details to those necessary to carry out pre-compliance measurements in house with modest equipment.

Reviews

There are no reviews yet.

Be the first to review “TekBox TBLM2 LISN MATE”

Your email address will not be published. Required fields are marked *