TekBox TBL5032-1

Code: TBL5032-1

The TBL5032-1 is a single path 50µH (+5 Ω) // 50 Ω LISN for conducted emission measurements of DC or AC powered electronic equipment. It is designed according to CISPR 16-1-2 and MIL-STD-461G standards and characterized in the frequency range of 10 kHz to 100 MHz.

In Stock 2-3 Weeks
Enquire Now

Description

The TBL5032-1 is a single path 50µH (+5 Ω) // 50 Ω LISN for conducted emission measurements of DC or AC powered electronic equipment. It is designed according to CISPR 16-1-2 and MIL-STD-461G standards and characterized in the frequency range of 10 kHz to 100 MHz.

Setting a high current jumper shorts the 5 Ohm resistor and configures it as 50Ω // 50µH LISN according to CISPR 16-1-2. Removing the jumper configures the LISN to (50µH + 5 Ω) // 50 Ω for MIL-STD application.

Combining two LISN with the Tekbox LISN Mate enables separate measurement of common mode and differential mode noise. EUTs with 3 phase supply require three or four pieces of TBL5032-1, depending on whether the product is supplied in delta or star configuration.

An exposed bottom panel enables convenient ground plane connection. The unit comes equipped with a N-male to N-male RG223 cable.

SPECIFICATIONS

  • LISN type: single path V-AMN, configurable (jumper) as 50 Ω // 50 µH + 5 Ω or 50 Ω // 50 µH; no 250 µH pre-filter
  • Characterized Frequency range: 10 kHz – 100 MHz
  • DC Resistance: 25 mΩ
  • Maximum current: 32 A continuous
  • Maximum operating voltage range: 0 – 500 V DC; 0 – 270 V AC (50/60 Hz), 0 – 120 V AC (400 Hz)
  • EUT connector: 4mm Banana socket
  • SOURCE connector: 4mm Banana socket
  • Earth: exposed stainless steel bottom panel with mounting slots and countersunk hole for 4mm screw
  • RF connector: N-Female
  • Dimensions: W x H x L; 205 mm x 155 mm x 360 mm;
  • Weight: 3 kg

APPLICATION

EMC pre-compliance testing of conducted noise

Model Overview

Model Impedance Frequency Range Path(s) Max. Current Max. Voltage Additional Features
TBL00705-2 0.7 µH//50 Ω 30 Hz – 500 MHz 2 5 A 60 V nominal, Component rating: 100 V 400 mΩ serial resistor
TBL0110-2 1 µH//50 Ω 30 Hz – 500 MHz 2 10 A 60 V nominal, Component rating: 100 V 100 mΩ serial resistor
TBL0225-2 2 µH//50 Ω 10 Hz – 200 MHz 2 25 A 60 V nominal, Component rating: 100 V 100 mΩ serial resistor
TBL0225-2B 2 µH//50 Ω 10 Hz – 200 MHz 2 25 A 100 V nominal, Component rating: 100 V 100 mΩ series resistor and internal 10,000 µF capacitor
TBL0510-1 5 µH//50 Ω 10 kHz – 400 MHz 1 10 A 60 V nominal, Component rating: 200 V •
TBL0550-1B 5 µH//50 Ω 10 kHz – 400 MHz 1 50 A 0 – 250 V AC @ 50/60 Hz, 130 V AC @ 400 Hz, 250 V DC 450 CV DC (components) Can be jumpered to various standards
TBL05100-1C 5 µH//50 Ω 10 kHz – 400 MHz 1 100 A 0 – 500 V AC @ 50/60 Hz, 250 V AC @ 400 Hz, 1500 V DC (components) Can be jumpered to various standards
Model Impedance Frequency Range Path Max. Current Max. Voltage Additional Features
TBL5032-1 50Ω/50µH+5Ω//50Ω/50µH 10 kHz – 100 MHz 1 32 A 500 V DC / 270 V AC (50/60 Hz)
120 V AC (400 Hz)
can be jumpered 50µH//50Ω or (50µH+5Ω)//50Ω no 250uH pre-filter
TBL50100-1B 50Ω/50µH+5Ω//50Ω/50µH 150 kHz – 30 MHz 1 82 A 0 – 500V DC; 0 – 270V AC (50/60 Hz),
0 – 120V AC (400 Hz)
can be jumpered 50µH//50Ω or (50µH+5Ω)//50Ω no 250uH pre-filter
TBL501000-1 50µH // 50 Ω 100 kHz – 30 MHz 1 1000 A 0 – 1000 V DC; 0 – 500 V AC (50/60 Hz)
TBL5008-2B (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 8 A 250V AC 50/60 Hz or DC separate RF outputs enabling LISN-Mate connectivity; Artificial hand connection PE switchable: 50Ω//50µH
TBL5008-2C (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 8 A 250V AC 50/60 Hz or DC Filter/Limiter/Attenuator switchable Artificial hand connection PE switchable: 50Ω//50µH
TBL5016-1 (50µH+5Ω)//50Ω 150 kHz – 30 MHz 1 16 A 250V AC 50/60 Hz or DC EOL, replaced by TBL5032-1
TBL5016-2B (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 16 A 250V AC 50/60 Hz or DC separate RF outputs enabling LISN-Mate connectivity; Artificial hand connection PE switchable: 50Ω//50µH
TBL5016-2C (50µH+5Ω)//50Ω 9 kHz – 30 MHz 2 16 A 250V AC 50/60 Hz or DC Filter/Limiter/Attenuator switchable Artificial hand connection PE switchable: 50Ω//50µH
TBL5016-3 (50µH+5Ω)//50Ω 9 kHz – 30 MHz 3 16 A 465V/270V Artificial hand connection PE switchable: 50Ω//50µH
TBL5032-3 (50µH+5Ω)//50Ω 9 kHz – 30 MHz 3 32 A 465V/270V Artificial hand connection PE switchable: 50Ω//50µH
TBL5063-3 (50µH+5Ω)//50Ω 9 kHz – 30 MHz 3 63 A 690V/400V 50Hz/60Hz Artificial hand connection PE switchable: 50Ω//50µH
Model Impedance Frequency Range Path Max. Current Max. Voltage Additional Features
TBLM2 • 150 kHz – 110 MHz • • • LISN-Mate
TBLDC32-2 150 Ohm 9 kHz – 30 MHz 2 32A 1000V DC 150 Ohm DC LISN A, B,
Common-Mode Differential-Mode operation
TBLVHF-B 50 Ohm +-10% 30 MHz – 300 MHz 2 16A 250V DC – 400 Hz Balanced VHF LISN
TBISN-T4 150 Ohm 150 kHz – 30 MHz 2 balanced pairs 250mA 60V AC, 100V DC 2 pcs D-Sub 25 to RJ45 adapter

Downloads

Datasheet


Adobe PDF

TBL5032-1 Manual / Data sheet

Language: English
Version: V1.1
File Size: 1.78 MiB
Release Date: 13.04.2026

Reviews

There are no reviews yet.

Be the first to review “TekBox TBL5032-1”

Your email address will not be published. Required fields are marked *