GW Instek PCS-1000I Precision Current Shunt Meter

Description

GW Instek PCS-1000I Precision Current Shunt Meter

PCS-1000I high precision AC and DC shunt meter can simultaneously measure current and voltage with the maximum 6 1/2 measurement resolution.

GW Instek rolls out the new PCS-1000I isolated output high precision current shunt meter, which inherits the simultaneous voltage and current measurement function of PCS-1000. PCS-1000I adopts five sets of independent shunt resistors to provide five current measurement levels, including300A,30A,3A, 300mA, and 30mA to meet the requirements of different current level measurements. Internally, PCS-1000I utilizes two sets of 24bits ADCs and low temperature coefficient electronic components to mainly focus on the current measurement of power supply devices. High precision PCS-1000I can be used in adjusting and calibrating instruments. Additionally, temperature variation will not cause PCS-1000I to yield any measurement errors. PCS-1000I can automatically select optimal measurement level with the maximum resolution so as to replace manual selection to save operational time.

Features:

• 6 1/2 digit voltage and current measurement resolution
• Simultaneous current and voltage measurement
• Five current measurement levels (AC&DC): 30mA/ 300mA/ 3A/ 30A/ 300A
• AC voltage measurement levels: 200mV/ 2V/ 20V/ 200V/ 600V
• DC voltage measurement levels: 200mV/ 2V/ 20V/ 200V/ 1000V
• Standard: USB
• CE verification

Included Accessories

• Quick Operation Guide x1, User Manual (CD) x1,
• AC Power Cord x1 (by region),
• GTL-105A Alligator Clip Test Lead x1,
• GTL-207A Banana Plug Test Lead x1,
• GTL-240 USB Cable x1,
• PCS-001 Basic Accessory Kit

Optional Accessories

• GRA-419-J Rack Mount Kit (JIS)
• GRA-419-E Rack Mount Kit (EIA)

PCS-1000I provides a BNC output, which can connect with an oscilloscope to directly observe current waveform variation without using a current probe. General oscilloscopes do not have isolated channels and their input and output are structured at a common point, therefore, the output load will likely result in measurement errors. PCS-1000I’s isolated current output design can prevent measurement errors from an oscilloscope with non-isolated outputs. PCS-1000I, a high precision AC/DC current shunt meter, not only provides USB communications interfaces for users to remotely control the instrument but also conducts simultaneous voltage and current measurements. The SCPI communications commands of PCS-1000I allow users to remotely control PCS-1000I via a PC to operate measurement data readbacks.